home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Alles Voor Internet / Tout Pour Internet
/
alles voor internet.iso
/
MacInternet™
/
Telnet
/
TeleFinder™ Pro 2.2.3
/
TF Pro Help
/
TF Pro Help.rsrc
/
STR#_15010.txt
< prev
next >
Wrap
Text File
|
1994-02-18
|
3KB
|
84 lines
This shows the modem that these settings should be used with.
Settings that end with “-HH” require a hardware handshake modem cable.
This is dimmed because the service is a TeleFinder Host.
You do not need logon macros to connect with TeleFinder Hosts.
Click in this button to link a logon macro to this service.
TeleFinder will run the commands in the macro after the modem make a connection.
TeleFinder will use a fixed port speed during modem connections.
Turn this option on to use a variable port speed.
Turn this option on if the service is a TeleFinder BBS.
Turn this option off if the service is a TeleFinder Pro remote access host.
This is dimmed because the service is not a TeleFinder Host.
TeleFinder will use the terminal window with this service.
Turn this option on if this service is a TeleFinder Group Edition BBS or TeleFinder Pro Remote Access Host.
TeleFinder will attempt to connect to this service using the full graphics interface.
Turn this option off if the service is a traditional terminal host.
TeleFinder will send modem strings at full computer speed.
TeleFinder will send modem strings at human entry speed.
Select the serial port flow control from this menu.
The flow control setting must be consistent with the modem strings and modem cable.
Hardware handshake requires a special cable.
TeleFinder will adjust the serial port speed to match the modem’s “Connect message” speed.
Turn this option off to use a “locked” port speed.
Turn this option on for modems that require a “Break” signal prior to modem initialization.
This option is often used with Telebit‚Ñ¢ modems.
TeleFinder will send a “Break” signal to the modem before it sends the modem strings.
This option is often used with Telebit‚Ñ¢ modems.
TeleFinder initializes the modem using the baud rate you select here.
This is the second set of commands sent to the modem.
This is the first set of commands sent to the modem.
You can save your password in this field.
Your password can be up to 9 characters long for TeleFinder systems.
This fields holds up to 31 characters of text.
Enter your logon name in this field.
This field holds up to 31 characters of text.
TeleFinder will dial the service using the phone number you provide in this field.
Enter up to 47 digits in this field.
Enter a name for this serivce to use in the service list.
This field holds up to 51 characters of text.
This field is required.
Click here to cancel without making any changes.
Click here to add this entry to the list.